What is the mold

Die also called mold embryo, or mold base. Mold base, easy to install the mold, from the support, protection, connecting the role of the key components (mold core). Plastic mold

Because the mold embryo does not participate in the forming, its shape does not change with the changes of the parts, and only relates to the size and structure of the parts. Therefore, the mold embryo can be standardized, that is, the mold embryo forms are generally similar, only the size and thickness change, After the processing is very convenient, the mold embryo factory can first mold a variety of different sizes of mold embryo parts (templates, guide columns), etc., and then according to customer needs to form a set of a mold embryo.

Mold mainly consists of four parts: the mold base, the next mold base, guide column, guide sleeve.

1, mold base. Belongs to the standard parts, according to production needs to choose the right steel, its rigidity, deformation coefficient and other physical properties have requirements.

A. Mold base shape is divided into round and rectangular.

B. Mold base with mold handle. According to the press situation, the manufacture of one or several specifications of the common mold handle, and then parts made of convex, die.

On the general punching, blanking, bending, simple drawing, school shape, etc., can use this method. Commonly used in small quantities and more varieties of stamping parts production.

2, guide post and guide sleeve. Is to guide the guide of the mold guide.